Zendure Community

christianeckert80@googlemail.com

With Anderson 12V I only have 10A output. If I go higher it shuts down and I have to close and activate DC again. It should have an output of 30A.

support

christianeckert80@googlemail.com Are you using a DC or are you connected to an inverter, if you are connected to an inverter then the situation is different.

israndy

Why? What made you think it did or would?

21232f297a57a5a743894a0e4a801fc3

30A is the technical specification for the Anderson DC Output.

christianeckert80@googlemail.com

In the manual is written Anderson 12,6V 30A, 378W max. So why it should not make me thinking that it would be 30A?

Micha83411

Outputs AC Outlet (4) 120V_60Hz, Total 3,800W Zen AC Outlet (2) 240V_60Hz or 120V_60Hz, Total 3,800W Car Outlet (1) 12.6V 10A, 126W Max** DC5521 (2) 12.6V 3A Andersen (1) 12.6V 30A, 378W Max USB-C1, USB-C2 5V 3A, 9V 3A, 12V 3A, 15V 3A, 20V 5A, each port 100W Max, Total 200W** USB-C3, USB-C4 5V 2.4A, 9V 2.22A, 12V 1.67A, each port 20W Max USB-A1, USB-A2 5V 2.4A, each port 12W, Total 12W (Max) * Zen AC Output supports either 240V or 120V output at a time. ** 126W refers to the combined maximum output power of the Car Outlet and the DC55

Micha83411

Maybe wrong wired i will test it, at 200watts are the fans spinnig 😵