Problem after Software update

ZenUser306By01c

Urgent!
I am probably user 100 with problems after the software update earlier this week, for my Solarflow 800 Pro.
In my case, the system does not use the data from the smart meter any more. Really annoying. On the user interface, I see the P1 (smart meter from Home Wizard), but it always reads 0 watt.

I expect from a company like Zendure that software updates are thoroughly tested for all eventualities, before releasing it to an existing customer base!

ZenUser2762A70K

Similar problems here after updating to HEMS 2.0. Solarflow 2400 Pro and HomeWizard P1 meter, which were working quote good before the update. Other soft- and firmware is up to date. P1 meter shows constant value of -152w no matter what is really happening. In de HomeWizard app the data are correct. P1 meter also occasionally disconnects from Zendure (this did not happen before) but stays connected to HomeWizard. So it is not a wifi issue.

ZenUser306By01c

ZenUser2762A70K Yes, I first had the same: a constant reading, in my case, of 145 Watts. I disconnected/reconnected the P1 several times. Currently, it reads 0 Watt. And yes it is indeed connected to my WiFi, and I can read out the true (varying) values.