Shelly Pro 3EM & Solarflow 2400 Pro

bogdan.pct

My system consists of 1 Shelly Pro 3EM, 1 Solarflow 2400 Pro with 4 AB3000L and a main solar system which is not that important for the problem I have.

The problem: the home is on triphase, the power consumption is measured on each phase by the distributor and the zendure is monophase. In the zendure app, I cannot make the app to take into account only the phase on which the batteries are conected. By not doing this, if there is a load on another phase, the zendure app wants to compansate with the same amount of power on its own phase. This is only draining the battery for now reason.

How can I enable only one phase from the shelly in the zendure app?
PS: without just disconnecting the other phases from the shelly meter, because I still want to see the values in the shelly app.

Henry

Nur eine Phase zu betrachten ist eigentlich nicht Sinn der Sache. Dein Stromzähler sollte saldierend sein, dh er verrechnet die Phasen miteinander.
Wenn du jetzt zb auch 2 Phasen je 100W Netzbezug hast und der Zendure auf der 3ten Phase 200W einspeist, hast du saldiert 0W Bezug.
Die Betrachtung aller 3 Phasen ist somit genau richtig.

ZenUser10N47j1x

and if it is still your plan to only consider this one phase, you have to install another power meter that only measures this particular phase and use it as the ct pointing the way!