Error code 71

wassimchegham

Hi, I have 2 Hyper2000 in HEMS and 4 PVs per Hyper. One of the hypers is reporting an error code 71 (incorrect PV wiring). This happens when batteries are full. When it happens the production stops. Also, both devices are up to date.

Any clue why this is happening?

Thanks.

Tim (Moderator)

wassimchegham Hallo. Wieviele Module mit welcher Leistung hast du denn an einem MPPT? Es deutet daraufhin, dass der MPPT überlastet wird, wenn im Bypass (nachdem die Akkus voll sind) alles ans Haus weitergeleitet werden soll.
Gruß, Tim.

wassimchegham

Hi Tim, I have only 1 PV per input, 2 PV per MPPT, that's 4 PV per Hyper. My panels are wired according to the manual. The panels are working fine for the last 2 years. I checked the DC voltage, and it's _40V per panel when the sun was shining today. The only difference today is that my batteries were fully charged which happened very rarely.

Thanks.

ZenUserDag

Ich hatte das auch und Zendure hat sich draufgeschaltet. Man hat ein Update gemacht