Update to v2.0.31 -> Battery Packs no longer recognized

Boris

After a successful update to v2.0.31 first output fluctuated greatly (app shows constant output of 150W, but should have been 200W), the micro inverter reads a constant up and down from 50 to 250W… after a reboot battery packs are not recognized anymore… exactly the same on 2 systems. How to downgrade???

2 Akkus

What happens after a reset of the hub? (Hold the button down for approx. 15 seconds and then release it). The restart should happen by itself...if not, press the button briefly!

Boris

After 4 restarts the batteries are recognized again, but output is again erratic. App shows a constant output about 50-100W below what is set, real output fluctuates heavily within seconds +/- 100w around the shown value in the app. This needs to be fixed immediately!

2 Akkus

I recommend, to get in contact with the Zendure Support! Dependend of, where you are located, use support@zendure.com or support-eu@zendure.com