Hyper 2000 3 phase

ZenUser20c38g9m

I have the following problem: I operate three Hyper 2000 devices, one per phase, and use a Shelly Pro 3EM to monitor the grid.

My phase A is usually loaded with around 250 W, while phases B and C are usually only loaded with 50 W. As a result, the Hyper 2000 connected to phase A discharges significantly faster at night than the others.

Could you please tell me how I can set the total power of all three phases to be taken into account so that the Hyper 2000 devices feed their power evenly into the grid?

Thank you in advance for your support.

sriii

Maybe too simple, but try to spread power-hungry devices equally on all three phases.

marusun

Hyper A: alle Phasen überwachen, Hyper B und C: Smart CT mit Steckdosen und Grundlast einstellen. Ich hoffe das Zendure auch noch einen Cluster für 3 Hyper auf verschiedene Phasen integriert. Dann würde auch ein automatischer abgleich funktionieren.