Can not set discharge since update today

David

I did the update if the software.
And I stopped this morning discharging so I could save it for tonight.
But when I now put discharge 200W for example it saves it but it doesn't work.
No discharge works and battery is 98%

Anybody has this issue or knows what to do?

Francisco

Cuanfo haces la descarga el hu. Hace clic??

David

Si click hace..se conecta de todo pero desde la actualización del otro día dejó de descargar

Francisco

Cuando haces la descarga el hub , hace clic ???

David

Thx..I just read it..I will try to follow and do it tomorrow..now it's too late aand getting dark.
I'll come back with the results

David

Doesn't work. I see the solar panels producing electricity and it goes directly to the battery which doesn't go higher than 98% for some reason.
Panels are producing around 300W now

David

The zendure Hun is now 100% ful..asthe auto bypass is activated it all says 0
So I disconnected everything and connected the solar panels to the micro convertor and it doesn't seem to start (red light keeps flashing) is that one broken? I hope not as it was already replaced after 2 months of working.
When I connect everything again with the hub and battery the battery gets charged until 100%
So what could it be? The micro converter is under a roof away from sun and rain. I wouldn't believe if that breaks again so soon (hopefully not that). Any ideas? Very strange that this happens after an update of the app and firmware of the hub