Home Panel mode on screen, but no home panel!

jimmyinhmb · 2024-10-02T15:18:55+00:00

I’m a 2 x SBV 4600 + 5 x B4600 US customer./n/nBought a ZenY cable to connect to a /nNEMA L11-40 inlet for whole-house backup/nwhile waiting for US version o...

jimmyinhmb

I’m a 2 x SBV 4600 + 5 x B4600 US customer.

Bought a ZenY cable to connect to a
NEMA L11-40 inlet for whole-house backup
while waiting for US version of home panel.

Worked well a couple of nights, but had not
recently charged system for calibration, so
brought all 7 batteries to 100% charge, then
began discharge via ZenY cable + Ethernet
cable. A bit over 2kW per SBV. Worked great
for a few minutes but then shut down with no
error code. Now the SBV4600 on left in photo
displays the Home Panel icon, even though I
haven’t received a home panel, and the ZenY cable + Ethernet cable will not feed 240V to
the L11-30P inlet.

Any ideas how I can persuade this SBV4600
that it is NOT connected to a home panel and get 240 flowing to the L10-30P? lithium iron
phosphate batteries age more quickly when
fully charged, so quick advice would be
appreciated.

rex

Long press AC for Home panel mode ON/OFF. Only short press AC to turn on/off AC output.

Ronalfaro11

Hey Jimmy, I was an early kickstarter customer in the US, and still took a while to receive home panel after main unit. I have 1 SBV 4600 version, with 1 Satellite battery, and Home panel, with all accessories including MC4 to XT90 for solar, and EV Zen port adapter to charge at an EV stall. Never used, opened to inspect. Am looking to sell everything as a package, at same low kickstarter price of $6K for EVERYTHING. I’ll cover shipping from FL. Let me know if interested. Thanks!